PETRIS-mellakkasuojat
Petris mellakkasuojavarusteet valmistetaan Tsekeissä ja ne ovat viranomaiskäytössä useissa maissa.
Mellakkasuojavarusteet koostuvat seuraavista osakokonaisuuksista:
SUOJAPUKU:
- Vartalosuoja
- Hartiasuoja
- Kyynervarsisuoja
- Reisisuoja
- Säärisuoja
- Kuljetus- ja säilytyslaukku
KYPÄRÄ:
- Varsinainen kypärä kiinnittimineen
- Visiiri
- Niskasuoja
KILPI:
- Kilpi ja siihen kiinnitettävät varusteet
- Kuljetus- ja säilytyslaukku
Lisätietoja näistä tuotteista antaa 
Tietoa PETRIS-mellakkasuojista
ANTI-RIOT PROTECTIVE SUIT
 Counter-blow unit with an increased resistance against the effects of heat and flame.
- optimal combination of a complete protection without any motion-related constraint
- high coverage grade (of protection for the body)
- application of shock-resistant plastics and special kinds of fabric (NOMEX from the Du Pont Company or 100% PAD with a permanent heat-and-fire-resistant finishing
- easy and fast to put on
- fastening and proper unit's adjusting on the individual types of figures are steps secured with dry zippers and flexible rubber belts.
 for concealed and outer wearing- materials applied are subjected to the tests upon hygienic and sanitation safety
- mass: for the size L: 5.0 kg
- product is tested upon the CSN EN 407 Standard
- possibility of suplementation with the suspensor
- you can modify your unit using the ballistic inserts of the frontal body and knee parts. Maximal threat-resistance level III.A according to the NIJ STD 0101. 04.
- tested under the CSN 39 5360 Standard - Test on resistance against the effect of stub weapons - TON I and TON II threat-resistance level
- experimental stub weapon has been simulated with 2.6 kg mass load with 35 ± 1 J impact energy made of steel of a semispheric shape (TON I) and under the shape of (TON II)
MELLAKKASUOJAKYPÄRÄ
Mellakkasuojakypärä visiirillä ja niskasuojuksella. Kypärä ei sovellu ajoneuvokäyttöön. Valikoimassa on useita eri malleja, myös std STANAG 2920 mukaisia suojakypäriä eri suojausluokissa.
Counter-blow protection helmets are designated for the accoutrements of anti-riot and action commandos.
 made from a special high-grade impact resistant polyester-based glass laminate - helmet shell is resistant against the coup at -20°C up to +50°C temperature
- shell's border is edged with the safety trimming
- helmet supporting system is equipped with the occiput cover fastening system is secured with the load-unlockable fastener
- protective shield from the coup-resistant splinterless polycarbonate having 3 mm thickness (4 mm as per customer's option)
- self-locking sealing profile to protect the visage against any running-down of any liquids and chemicals from the helmet surface
- occiput cover from anti-coup material, black artificial leather-coated
- fastening facility of the total facial gas mask
- colours: black, blue, white, on customer's option - in quantity-important deliveries
- Weight: ca. 1 700 g
- Customer-optional deliveries of 01 - 03 protection helmets upon the threat-resistance levels: 12 x 76 mm MAGNUM 4.0 mm (tested at 5 m range)
- Mass of helmets upon the above threat-resistance level: ca 1. 800 g
MODEL 01
- surface finish with colour varnish
- two air vents in the back part of the shell
- aural apertures for better hearing
- inside outfit of helmet from special anti-coup expanded plastics coated with the comfort textile
- shielded visor is screw-mounted in three points onto the aluminium plate, which is embedded into the blocking articulation
- occiput cover is hard-anchored on
ANTI-RIOT PROTECTIVE SHIELD TWICE BEND
Läpinäkyvä mellakkasuojakilpi. Useita malleja, myös raskaita ballistisia suojakilpiä.
RIOT CONTROL EQUIPMENTS - ANTI-RIOT SHIELD
 impact-resistant splinterless polycarbonate with 3 mm thickness ( 4 mm - optional) - execution of the shield body according to the Fig.
- internal system presents vacuum-formed reinforcement from 3 mm thickness polycarbonate (PC) in order to harden the entire construction and increase in absorption effect of the shield. Structure-suitable for the right or left hand gripping
- cross gripping
- gripping system. System of grips - combination of up-holstered plastic grip, which is fixed with the screws under 45° angle, with monolaterally fitted holder, which works as a safety fuse against any eversion of the arm
- external face of reinforcement is up-holstered with the shock-resistant expanded plastics for a significant depression of any impact energy
- preservation of protection properties is ranged as from -40°C up to + 120°C
- possibility of equipping the shield with holders for tonfa, truncheon, "POLICE" inscriptions
- size: 100 x 58 cm
- threat-resistance level: up to 90 J, at 0.45 kg specimen mass and 20 m/s impact velocity
- possibility of setting on additional resistance against 12 x 76 mm Mag. (4mm)
|
